1.

Click to and create a riser:

2.

Click to and create a floor:

3.

Choose from the templates th combination "Kitchen" an pull it per "Drag&Drop" into the scheme:

4.

Repeat step 3 with "Bath":

5.

Switch to the area "Piping".

Set the "Flow-Splitter" and the "Flow-Splitter-End" as shown in the video:

6.

Click with right mouse-button on the frame that includes all objects and copy it to the other side:

7.

Click with the right mouse-button on the frame of the floorand copy it 3x to above:

:

8.

The floors are created:

9.

In the second floor, the distribution shall be transfered to upwards.

For that click the frame of the floor:

Choose the connection position "Above":

Click on the button "Save" below.

10.

Click with the right mouse-button on the riser to duplicate it:

The 2nd riser is shown here:

11.

Now we want to create the groundfloor in the 1st riser.

Click with right mouse-button on the lowest floor and choose "insert floor" and "below":

With right-click on the riser you create the 0-level:

12.

Das neue Geschoss wird als Verbindungsgeschoss definiert:

13.

In that connecting floor you insert per Drag&Drop the Main-Water-Connection and a Hot-Water-Tank into the 1st riser:

14.

Save the scheme:

15.

With the button the created scheme can be shown in CAD: