From version 202203xx onwards, it is possible to calculate parts of Easyline in all trades.
|
ATTENTION! The following requirements apply: 1. The entire system must have been calculated 1x before.
2. The selection must be made in such a way that it is clearly recognizable where the starting point is (1 open end).
3. The data is taken from the starting point of the whole system. |
1. |
The entire system has to be completely calculated once.
|
2. |
From the second time on, partial calculations can be made.
To do this, select the section to be calculated:
|
3. |
Several sub-areas can also be chosen:
|
|
ATTENTION! The following selection does not work because there are 2 open ends:
|
