90° Elbow

A 90° elbow can be drawn with this function.

45° Elbow

A 45° elbow can be drawn with this function.

Angled Elbow

An angled elbow can be drawn with this function.

Mitered Elbow

A mitered elbow can be drawn with this function.

Alignment

Side/Center:

Side    ... Bow ends with back edge at 2nd system-point.

Center... Bow ends centric at 2nd system-point.

Rotation:

Shows the new direction of construction in degrees.

The direction can be manually rotated for rectangular ducts with these buttons

in four main directions (up, down, left, right).

Cross sections

All elbow parameters are shown and modified here.

The starting width and height are taken from the previous part. The end width can be manually entered.

Dimensions

Angle:

The angle for the special fitting.

e:

The straight dimension of the inner edge at beginning of fitting for connection profile.

f:

The straight dimension of the inner edge at end of fitting for connection profile.

r:

The inner radius of elbow or knee.

Selected length

Rest length

Std. length

See chapter "Length"

Functional fields

(Place, Continuous construction, Cancel)

See chapter "Functional fields"