Access to the command over:

Command line: _FLIDEF

Assistant: | Ventilation |

Toolbar: Ventilation | Interfaces |

Sorting

Sorts the parts.

Formula Number - The individual numbers are listed in consecutive formula numbers.

Position Number - The individual numbers are listed in consecutive position numbers.

Similar Parts summary - Identical parts are summary.

Individual Positions - Every part is shown in the list.

Drawing Transitions

Transitions can be drawn as rectangular to rectangular.

Ri/Ro

Sorts out the transitions rectangular&round.

Rectangular cross sections are shown at entrance or exit.

Straight Ducts

Serves to issue rectangular ducts.

yes - Fittings and straight ducts are issued.

no - Only fittings are issued.

only ducts - Only ducts are issued.

from/to - Limits the duct length to be issued.

Formula Number

Fittings to be issued can be defined with Formula numbers.

Round ducts - Acitvates&Deactivates round ducts for issuance.

Setting Fittings List Grid

3x3 - Shows 9 parts to a list (3 horizontal, 3 vertical).

2x2 - Shows 4 parts to a list (2 horizontal, 2 vertical).