<< Click to Display Table of Contents >> Navigation:  Reference Commands > R > Re-EasyLine > Example - Re-EasyLine

 

This example shows how a constructed ductwork can be generated into a Easyline System.

 

The following ductwork has to be calculated:

 

 

 

Move a window over the parts which should be calculated.

Select the start point for calculation.

The start point is marked and the Easyline-Start Value window will be opened.

 

 

 

Confirm with "OK".

The function jumps to all open ends of the system.

They will be marked and load points will be acquired.

 

 

 

 

The Easyline System is generated and the Pressure loss calculation is shown in a EXCEL-List.