Reference Commands > F

The slope of a partial line can be fixed.

Access to the command over:

AutoCAD/BricsCAD	Allplan
Command line: _FIXGEFALLE Assistant: \| Sanitary Easyline Service \|	Toolbar: Sanitary facilities \| Drainage \|

AutoCAD/BricsCAD

Allplan

Command line: _FIXGEFALLE

Assistant: | Sanitary Easyline Service |

Toolbar: Sanitary facilities | Drainage |

After calling up the function, click on one or more partial lines and confirm.

All the information regarding the selected element is shown.

AW_fixgefalle

Option	Beschreibung
FLOW sum	Is the total flow of the line picked.
Qmax	The maximum flow of the line picked.
Velocity	The velocity of the line picked.
Quantity of Connections	Quantity of load points connected to the line picked.
Line Type	Type of line.
calculated cross section	The calculated cross section is shown here.
fixed cross section	The cross section or slope can be fixed here.
starting/end height	The start and end height of the waste water line are shown. Always the pipe center is considered.