T-piece symmetrical

Draws a round symmetrical through-Tee.

T-piece asymmetrical

Draws a round Tee with angled branch.

Through transition Tee

Draws a round symmetrical through-transition-Tee.

Alignment

Side/Center:

Side    ... Bow ends with back edge at 2nd system-point.

Center... Bow ends centric at 2nd system-point.

Rotation:

Shows the new direction of construction in degrees.

The direction can be manually rotated for rectangular ducts with these buttons

in four main directions (up, down, left, right).

With this function you can change between a through-fitting tee and a cross fitting tee.

Duct Tables

Button to edit the Duct Tables for all trades.

Dimensions

Enters the individual cross sections.

d1:

Entry cross section

d2:

Through-flow cross section

d3:

Branch cross section

Angle:

Angle at branch.

Length

The variable lengths of tees can be entered here.

L1 is the entire length of tee.

Selected length

Rest length

Std. length

See chapter "Length"

Functional fields

(Place, Continuous construction, Cancel)

See chapter "Functional fields"