Valve selection Cooling (Fancoils)

                                 Access to the command over:

Command line: _VE_AUSWAHL_FAN

Assistent: | Fancoil |

1.

If you choose more than one fancoil, all selected fancoils will get the same values (valves, connection,...).

2.

If you choose only one fancoil, the drawing will be searched for identical types of fancoils.

The following dialogue opens:

- Confirm with "YES"  - all identical fancoils in plan are changed.

- Confirm with "NO"   - only the manually selected fancoils will be changed.

Connection type

The fancoil connection can be defined.

The connection is shown in the diagram graphic.

These connections can be selected from one of the lists.

This connections are saved in the file %\k_data\heizung\vent.txt

Attention:

Only certificated CAD administrators are allowed to create or edit these files.

If the connections should be changed or newly selected of an already defined

radiator, a graphic preview is shown..

Change flow/return

Changes FL/RT.

Wall connection

The length of the wall connection.

Loop through connection

Cross FL/RT with distance

This setting allows the return flow to first pull down during connection, in order to prevent a supply and return flow collision.

Valve conn. length at side

Defines the lengths of the valves of FL/RT.

Valves

The selected valves are shown. These valves can be found in the VDI3805 link ().

By activating a valve, the positioning on the radiator can be manually set.