Duct Tables

Button to edit the Duct Tables for all trades.

Volume flow

This function activates the Volume Flow Calculation for ductwork cross-sections.

Dimensions

Serve the entry of each cross section of transition.

d1:  

The start cross section of the fitting as entered in Starting Values will be shown.

d2:

This cross section can either be manually intered, taken from the Duct Tables.

Distance d1/d2:

Distance at beginning and end of transition.

l/W:

Angle and length of transition. The special fitting length is taken from the cross sections and finishing parameters with an angle of 30°, and can be modified.

Deflection f

According to DIN Norm, the given horizontal transition projection (right edge to right = +f).

This projection can be centrical, left straight, right straight or custom selected.

Deflection e

According to DIN Norm, the given vertical transition projection (top edge = +e).

This projection can be centrical, top straight, bottom straight or manually selected.

Selected length

Rest length

Std. length

See chapter "Length"

Functional fields

(Place, Continuous construction, Cancel)

See chapter "Functional fields"