Reference Commands > E > Easyline > Easyline Ventilation

A line group drawn with the standard functions (line, polyline, elbow, etc.) can be calculated and set to an Easyline-System for ductwork construction.

For dimensioning ductwork, the values in Easyline load points ventilation and Easyline start points ventilation are used.

Access to the command over:

AutoCAD/BricsCAD	Allplan
Command line: _EASYLINE Assistant: \| Ventilation Easyline \|	Toolbar: Ventilation \| Easyline Ventilation \|

AutoCAD/BricsCAD

Allplan

Command line: _EASYLINE

Assistant: | Ventilation Easyline |

Toolbar: Ventilation | Easyline Ventilation |

After calling up the function following Dialogue opens:

easyline_Neu

Dialogue-Options

Option		Description
Create 3D elements		A ductwork is generated by calling up the function and choosing all lines, that need to be calculated, in a selection-window. Additional there is the possibility to pick only the starting-points to calculate the whole system. If you choose only starting-points, it is necessary that all load-points are displayed at the screen (Block-layer and Element-layer).
Show result list		A pressure loss calculation will be made and issued in EXCEL.
Activate Dialogue Show Easyline		Function to check and change Easyline-systems.
Settings		Here you can make settings for Easyline.